Assembling The Dvd-Rom Drive - Toshiba TECRA S1 Maintenance Manual

4 Replacement Procedures
Figure 4-16 Removing the frame from the DVD-ROM drive

Assembling the DVD-ROM Drive

Assemble the DVD-ROM drive according to the following procedures and Figures 4-15 and
4-16.
1. Attach the frame to the DVD-ROM drive .
2. Secure the frame with the five M2x3 white super flat-head screws.
3. Attach the connector and connector cover to the DVD-ROM drive, and secure them
with the two M2x8 black bind screws.
4-30
4.5 Selectable Bay Module
TECRA S1 Maintenance Manual