Installing The Touch Pad - Toshiba TECRA S1 Maintenance Manual

4 Replacement Procedures

Installing the Touch Pad

Install the touch pad according to the following procedures and figure 4-17and 4-18.
1. Connect the touch pad cable to the connector CN8.
2. Fasten the touch pad 5 bottom latches in the correct position.
3. Place the touch pad in the correct position and fasten the following 15 latches, in that
order:
- One latch on the left and three latches on the right sides
- Six top latches
- Five bottom latches
4-32
Figure 4-18 Removing the touch pad
4.6 Touch Pad
TECRA S1 Maintenance Manual