Lcd Modules; Removing The 15.0-Inch Lcd Module - Toshiba TECRA S1 Maintenance Manual

4.17 LCD Module
4.17

LCD Modules

NOTE: ICs are fragile. Use extreme care not to apply pressure to the ICs along the
edges of the LCD module.
NOTE: Dispose of used LCD panels (fluorescent (FL) tubes) as required by local
ordinances or regulations.

Removing the 15.0-inch LCD module

Remove the 15.0-inch LCD module according to the following procedures and Figures 4-38,
4-39 and 4-40.
1. Remove the two M2.5x3.5 black flat-head screws and two M2x5 white bind screws
for fixing the LCD module.
2. Carefully tilt the LCD module toward you.
3. Remove the two M2x3 white bind screws on each of the left and right sides for fixing
the LCD bracket.
Figure 4-38 Removing the 15.0-inch LCD module and screws
TECRA S1 Maintenance Manual
4 Replacement Procedures
4-57