Figure 4.4 Removing The Hdd Bracket; Installing The Hdd - Toshiba Satellite T230 Maintenance Manual

Hide thumbs Also See for Satellite T230:
Table of Contents

Advertisement

Fehler! Verwenden Sie die Registerkarte 'Start', um
soll.
Fehler! Verwenden Sie die Registerkarte 'Start', um
werden soll.
2
M3×3*4
CAUTION: Do not apply pressure to the top or bottom of the drive.

Installing the HDD

Install the HDD according to the following procedures.
CAUTION: To avoid damage, always hold the HDD only by its sides.
1. Place the HDD into the HDD bracket.
2. Secure the HDD to the bracket with four M3x3 screws.
CAUTION: To prevent the HDD bracket from being distorted when installing the HDD into
the laptop, do not press the center of the HDD pack. Always hold the HDD pack by its sides.
3. Insert the HDD into the HDD bay, and slide the HDD inward to connect to the
motherboard.
4. Secure the HDD pack in the HDD bay with two M2x3 screws.
5. Replace the logic lower door.
6. Tighten one M2x4.5 screw on the logic lower door.
Satellite/Satellite PRO T230 Maintenance Manual
標題
2 dem Text zuzuweisen, der hier angezeigt werden
標題
1

Figure 4.4 Removing the HDD bracket

2 dem Text zuzuweisen, der hier angezeigt
4 Replacement Procedures
3
4
4-13

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Satellite pro t230

Table of Contents