Cooling Module; Removing The Cooling Module - Toshiba TECRA S1 Maintenance Manual

4 Replacement Procedures
4.2

Cooling Module

CAUTION: When removing the cooling module, keep the following in mind:
1. The cooling module can become very hot during operation. Be sure to let it cool down
before starting the repair work.
2. Do not touch or give shock to the fan in the cooling module.

Removing the Cooling Module

Remove the cooling module according to the following procedures and Figure 4-7 and 4-8.
1. Disconnect the cable of the cooling module from CN1007 on the system board.
2. Release the four cooling module fix screws according the order 1 till 4.
3. Remove the cooling module.
4-18
Figure 4-7 Removing the cooling module
4.2 Cooling Module
TECRA S1 Maintenance Manual