Installing The Hdd; Figure 4.9 Removing The Hdd Plate - Toshiba NB300 Maintenance Manual

Error! Style not defined. Error! Style not defined.
4. To separate the plate from the HDD, remove four M3x3 screws.
CAUTION: Do not apply pressure to the top or bottom of the drive.

Installing the HDD

Install the HDD according to the following procedures.
CAUTION: To avoid damage, always hold the HDD only by its sides.
1. Place the HDD into the HDD plate.
2. Secure the HDD and its plate with four M3x3 screws.
CAUTION: To prevent the HDD plate from being distorted when installing the HDD pack
into the laptop, do not press the center of the HDD pack. Always hold the HDD pack by its
sides.
3. Install the HDD pack into the correct position in the laptop. Connect the HDD pack to the
laptop.
NB300 Maintenance Manual
M3x3*4

Figure 4.9 Removing the HDD plate

4 Replacement Procedures
4-17