Installing The 14.0-Inch Lcd Module - Toshiba TECRA S1 Maintenance Manual

4 Replacement Procedures

Installing the 14.0-inch LCD Module

Install the 14.0-inch LCD module according to the following procedures and Figures 4-41,
4-42 and 4-43.
1. Connect the LCD/FL cable to the LCD module.
2. Place the LCD bracket in the correct position and secure it with the four M2x3 white
bind screws on each of the left and right sides.
3. Place the LCD module in the correct position and secure it with the two M2.5x3.5
black flat-head screws and two M2x3 white bind screws.
4-62
4.17 LCD Module
TECRA S1 Maintenance Manual