Removing A Memory Module - Toshiba Satellite R10 User Manual

7. Seat the memory module cover and secure it with one screw.
Be sure that the cover is closed firmly.
M
EMORY MODULE
COVER
8. Install the battery pack. Refer to
Chapter 6, Power and Power-Up Modes, for details.
9. Return your computer to the upright position.
10. Turn the computer power on and make sure the added memory is
recognized.
Click start, click Control Panel, click Performance and Maintenance
and select the System icon. Open System Properties window and click
General tab.

Removing a memory module

To remove the memory module, make sure the computer is in boot mode
then:
1. Set the computer to boot mode and turn the computer's power off. Make
sure the Power indicator is off.
2. Remove AC adaptor and all cables connected to the computer.
3. Turn the computer upside down and remove the battery pack. Refer to
Replacing the battery pack
Modes, for details.
4. Loose a screw securing the memory module cover. The screw is
attached to the cover to prevent it from being lost.
Be sure that the cover is closed firmly.
5. Slide your fingernail or a thin object under the cover and lift it off.
6. Push the latches to the outside to release the module. A spring will force
one end of the module up.
Satellite R10
Seating the memory module cover
Replacing the battery pack
section in Chapter 6, Power and Power-Up
Optional Devices
S
CREW
section in
8-8