Using Optical Media Drives; Loading Discs - Toshiba Satellite R10 User Manual

Using optical media drives

The text and illustrations in this section refer primarily to the optional media
drive. However, operation is the same for other optical drive in the Slim
Select Bay. The full-size drive provides high-performance execution of CD/
DVD-ROM-based programs. You can run either 12 cm (4.72") or 8 cm (3.15")
CD/DVDs without an adaptor. An ATAPI interface controller is used for CD/
DVD-ROM operation. When the computer is accessing a CD/DVD-ROM, an
indicator on the drive glows and the Slim Select Bay indicator glows.
Use the WinDVD application to view DVD-Video discs.
If you have a DVD-ROM&CD-R/RW drive, refer also to the
DVD-ROM&CD-R/RW drive
If you have a DVD Super Multi drive, refer also to the
DVD Super Multi drive
When the power of the optical media drive is off, pressing the Fn + Tab keys
will turn the power of the optical media drive on. Furthermore, it is possible
to set it to turn the power of the optical media drive on and eject the tray at
the same time. When the power of the optical media drive is off, eject button
does not operate. Use a Fn + Tab key and turn ON the power of the optical
media drive.

Loading discs

To load CD/DVDs, follow the steps below.
1. When the computer's power is on, press the eject button to open the
disc tray slightly.
Satellite R10
section for precautions on writing to CDs.
section for precautions on writing to CDs.
E
JECT
Pressing the eject button
Operating Basics
Writing CDs on
Writing CD/DVDs on
B
UTTON
4-15