Toshiba Satellite R10 User Manual page 160

2. Connect the TV adaptor cable's S-Video plug to the Video-out jack on
the TV.
Press the hot keys Fn + F5 to change the display device.
If a television is connected to the computer, set the TV type in Display
Properties. Follow the steps below.
■
TV single
1. Click start and click Control Panel.
2. Double-click the Display icon to open the Display Properties
3. Click the Settings tab and click the Advanced button.
4. Click Intel
5. Change TV Standard type and Apply and OK.
■
LCD/TV Mode (Dual Display Clone / Extended Desktop)
1. Click start and click Control Panel.
2. Double-click the Display icon to open the Display Properties
3. Click the Settings tab and click the Advanced button.
4. Click Intel
5. Select Device Settings.
6. Change TV Standard type and enter OK at Device Settings and Apply
■
There are 10 TV standard type in the list, but please select one of
following three TV standard types,
■
■
■
Satellite R10
window.
®
Extreme Graphics2 for Mobile, click Graphics
Properties, select Device tab and TV icon.
window.
®
Extreme Graphics2 for Mobile, click Graphics
Properties, select Device tab.
®
and OK at Intel 82852/82855 GM/GME Graphics Controller
Property.
NTSC-M (for the United States)
NTSC-J (for Japan)
PAL-B (for Europe)
Optional Devices
8-13