Toshiba Satellite R10 User Manual page 154

5. Slide your fingernail or a thin object under the cover and lift it off.
M
EMORY MODULE
COVER
6. Fit the memory module's connectors into the socket at about a 45 degree
angle and push the module down until latches on either side snap into
place.
Align the notch of the memory module with that of the memory slot and
gently insert the module into the slot.
Align the grooves of the memory module with the locking tabs of the
connector and insert the module into the connector firmly. If you find it
difficult to install the memory module, try to adjust the tabs of the connector
with a pen tip or other tools. Make sure to hold the memory module with
your fingers on the side edges (sides with grooves).
■
Be careful not to drop the screw inside the computer.
■
Do not touch the connectors on the memory module or on the computer.
Debris on the connectors may cause memory access problems.
Satellite R10
Removing the memory module cover
S B
LOT
S A
LOT
Seating the memory module
Optional Devices
S
CREW
8-7