Wireless Lan; Printer; Tv Output Signal - Toshiba Satellite R10 User Manual

Wireless LAN

If the following procedures do not restore LAN access, consult your LAN
administrator. For more information on wireless communication, refer to
Chapter 4,
Problem
Cannot access
Wireless LAN

Printer

Refer also to the
and to the troubleshooting and other relevant sections in your printer and
software documentation.
Problem
Printer does not turn on. Check that the printer is connected to an electric
Computer/printer do
not communicate
Printer error

TV output signal

Refer also to your TV set's documentation.
Problem
Display on TV is poor
Satellite R10
Operating Basics.
Procedure
Make sure the computer's wireless
communication switch is set to on.
If problems persist, contact your LAN
administrator.
Parallel printer
Procedure
outlet. Make sure the outlet is supplying power by
plugging in an appliance.
Make sure the printer is turned on and is online
(ready to use).
Inspect the cable connecting the printer to the
computer for damage. Make sure it is securely
connected.
A parallel printer connects to the parallel port.
Make sure the port is configured correctly. Refer
to Chapter 7,
Make sure your software is configured to
recognize the printer. Check your printer and
software documentation.
Check your printer documentation.
If problems persist, contact your dealer.
Procedure
Make sure the TV type is correct for your area:
NTSC (US, JAPAN), PAL (Europe).
sections in Chapter 8,
HW Setup.
Troubleshooting
Optional Devices,
9-19