Toshiba Satellite R10 User Manual page 140

Parallel Port Mode
The options in this tab are ECP and Standard Bi-directional.
ECP
Standard
Bi-directional
USB
USB KB/Mouse Legacy Emulation
Use this option to enable or disable USB KB/Mouse Legacy Emulation. If
your operating system does not support USB, you can still use a USB mouse
and keyboard by setting the USB KB/Mouse Legacy Emulation item to
Enabled.
Enabled
Disabled
USB-FDD Legacy Emulation
Use this option to enable or disable USB-FDD Legacy Emulation.
Enabled
Disabled
Button Setting
Standby
Set this option for high speed recovery from the Standby mode.
Fast
Normal
Satellite R10
Sets the port type to Extended Capabilities Port
(ECP). For most printers, the port should be set to
ECP (Default).
This setting should be used with some other
parallel devices.
Enables the USB KB/Mouse Legacy Emulation
(Default).
Disables the USB KB/Mouse Legacy Emulation.
Enables the USB-FDD Legacy Emulation
(Default).
Disables the USB-FDD Legacy Emulation.
Recover from the Standby mode at high speed.
Please ensure that the AC adaptor is connected
when selecting this mode.
Recover from Standby mode at normal speed.
HW Setup
7-7