Hydraulic Test Fittings - Toro Sand Pro 2020 Service Manual

Hydraulic Test Fitting Kit – TOR4079
This kit includes a variety of O–ring Face seal fittings to
enable you to connect test gauges into the system.
The kit includes: tee's, unions, reducers, plugs, caps,
and male test fittings.

Hydraulic Test Fittings

On the SP 2020/3020, there is tight clearance between
the charge pressure test port on the hydrostat and the
engine base plate. It might be helpful to first attach a
male pipe (swivel) adapter to the test port and then a
street elbow before connecting a test gauge.
Both fittings carry the following Parker Hannifin part
numbers:
Male Pipe Adapter
Street Elbow
Sand Pro 2020/3020/5020
0107–2–2
1/8 CD
Page 4 – 15
TORO TEST FITTING KIT (NO. TOR4079)
Figure 10
1
Figure 11
1. Swivel Adapter
Hydraulic System (Rev. A)
2
2. Street elbow