General Run & Transport Problems - Toro Sand Pro 2020 Service Manual

Starting Problems (continued)
Problem
Engine cranks, but does not start.
General Run and Transport Problems
Problem
Battery does not charge.
Electrical Systems
Possible Causes
Wiring to start circuitry (see Wiring Schematics) is
loose, corroded, or damaged.
10 ampere fuse is missing or open (SP 5020).
Ignition switch is faulty.
Fuel solenoid is faulty.
Spark plugs are faulty.
Engine or fuel system is malfunctioning (see Chapter 4
– Briggs & Stratton Vanguard Engine).
Engine is out of fuel or may be to cold.
Possible Causes
Wiring to the charging circuit (see Wiring Schematics)
components is loose, corroded, or damaged.
Voltage regulator/alternator is faulty.
20 ampere fuse is missing or open (SP 2020/3020).
Fusible link is open.
Ignition switch is faulty.
Battery is dead.
Page 5 – 8 Sand Pro 2020/3020/5020