Introduction - Toro Sand Pro 2020 Service Manual

Introduction

This Chapter gives information about specifications,
maintenance, troubleshooting, testing, and repair of the
gasoline engines used in the Sand Pro 2020, 3020, and
5020.
Most repairs and adjustments require tools which are
commonly available in many service shops. Special
tools are described in the Briggs and Stratton Vanguard
Repair and Service Manual for 4–Cycle V–Twin Cylin-
der OHV Engines. The use of some specialized test
Engine
equipment is explained. However, the cost of the test
equipment and the specialized nature of some repairs
may dictate that the work be done at an engine repair fa-
cility.
Service and repair parts for Briggs and Stratton Van-
guard engines are supplied through your local Briggs
and Stratton dealer or distributor. If no parts list is avail-
able, be sure to provide your distributor with the Toro
model and serial number.
Page 3 – 2
Sand Pro 2020/3020/5020