2. Installation
2.9.5 Master Mode
(1) Ensure that the board is connected to the fieldbus. Then, start the applicomIO
(2) Register the device information (EDS file) that is necessary for the network setup.
(3) Following dialog appears. Register the EDS file that is supplied from the device
60
console application.
Select the [Equipment Library] tab at the center of the dialog's right side and click
the Add icon.
manufacturer.
(3)-1 Click Next button.
(3)-2 Specify the folder that EDS is stored, and click the Next button.
Fieldbus I/O Rev.6