Epson EM07ZS1647F User Manual page 40

2. Installation
(6) Allow the default components to be installed.
(7) Select the protocol: DeviceNet you will be using. If you also use PROFIBUS DP,
(8) Complete the installation.
(9) The message to ensure the restart appears. Click the Yes button.
(10) Start the C:\Install\FieldBus\Install\SP\Setup.EXE and install the service pack.
(11) After completing the installation of the service pack, shutdown the computer.
(12) Proceed to 2.5.4 Board Installation.
28
select Profibus-DP as well. Select which type of device data files to install (EDS for
DeviceNet, GSD for PROFIBUS DP).
No installation is necessary when a service pack is not attached to controller.
Fieldbus I/O Rev.6