Master Mode - Epson EM07ZS1647F User Manual

2.7.5 Master Mode

(1) Ensure that the board is connected to the fieldbus. Then, start the applicomIO
(2) Register the device information (EDS file) that is necessary for the network setup.
(3) Following dialog appears. Specify the EDS file that is supplied from the device
(4) Click on the "Protocol list" under the board that was just added.
(5) Select Protocol | Property.
Fieldbus I/O Rev.6
console application.
Select the [Equipment Library] tab at the center of the dialog's right side and click
the Add icon.
manufacturer.
2. Installation
31