Epson EM07ZS1647F User Manual page 71

(10) Click the OK button. The following dialog will appear.
(11) After all the boards are added, the system should be restarted.
(12) After restarting the system, continue with the following 2.9.5 Master Mode or 2.9.6
Fieldbus I/O Rev.6
Configure the IP address for the EtherNet/IP board.
Select the IP address from Static, DHCP, or BOOTP at Configuration.
Do not select Flash Memory.
When you select Static, set the values for each item.
Close the applicomIO Console application and click the OK button on the Save
modification dialog. Click the OK button on the following dialog to restart
Windows.
Slave Mode sections.
2. Installation
59