Epson EM07ZS1647F User Manual page 51

(9) Select File | Download in Flash to register the configuration in the fieldbus board.
(10) Close the applicomIO console application.
(11) The default slave EDS file is created.
Fieldbus I/O Rev.6
After a few seconds, the board's state will show green in the status bar.
The path is: C:\Program Files\Woodhead\Direct-link\ApplicomIO2.3\ConfigIO
\Config01\applicomio.eds.
You may make a copy of the default slave EDS file and modify it to create your
original EDS file if necessary.
Edit the copy of the slave EDS file using Notepad. You may want to change the
VendName and ProductTypeStr.
2. Installation
39