Table of Contents
Advertisement
SENSOR
TYPE
4-4-1. ALARM-OUT
Item
ALARM OUT
SENSOR IN
MOTION ON
VIDEO LOSS ON
ALARM DURATION
ERROR ALARM
2. Press the same number as ID set in DVR on the remote
control.
3. An icon will be displayed on the Live Screen that corresponds
to the remote control ID number.0
The options are from 0 to 99
Select sensor from 1 to 10.
Set the type of sensor for the specified channel. Options are:
OFF, NORMAL OPEN, and NORMAL CLOSE.
Figure 4.4.2. ALARM-OUT Setup Screen
Table 4.4.2. Menu Item in ALARM-OUT Setup Screen
Select an Alarm out number.
Enable Alarm Out by Sensor from 1 to 10 Inputs.
Enable Alarm Out by Camera Motion from 1 to 10 cameras.
Enable Alarm Out by Video Loss from 1 to 10 cameras.
Set the alarm dwell time from 5 to 60 seconds.
Set the error type for the alarm beeping activation. The options are;
OFF, ALL, HDD ERROR and VIDEO LOSS.
Description
29
Advertisement
Table of Contents
