Table of Contents
Advertisement
Select the display language using the mouse or the control button on the remote control.
LANGUAGE
Once a language is selected, the display language changes.
DATE
Select the date display format using the mouse or the control button on the remote
FORMAT
control. Options are: YYYY/MM/DD, MM/DD/YYYY, DD/MM/YYYY, YYYY-MM-DD, MM-
DD-YYYY, DD-MM-YYYY
SET
Select the display date and time using the mouse or the control button on the remote
DATE&TIME
control and press OK button to set the present date and time.
Select DAYLIGHT SAVING using the mouse and the control button on the remote control
and select the appropriate daylight saving time zone.
If choosing EU or OTHERS, set the applicable conditions.
The options are:
OFF: Daylight saving is turned off.
USA: Applies the USA daylight saving time.
EU: Applies the EU daylight saving time.
OTHERS: If the time zone is neither USA nor EU, set the start and end date of the
daylight saving period.
- Do not set the start time to 23:00 for DLS.
- DLS can‟t be applied if the date of BEGIN and END is the same.
Enable/Disable remote access through network client software.
CLIENT
ACCESS
- Select the GMT AREA using the control button.
- Set the time difference with the standard time using the control button.
-
Select BEGIN or END using the control button and press the SEL button.
-
Select the item using the control button, select the setting value using the
control button and press the ESC button to return to SET DATE & TIME
setup menu.
CAUTION
36
Advertisement
Table of Contents
