Table of Contents
Advertisement
4-2. Setup – DISPLAY
In the SETUP menu, select the DISPLAY tab. Then, the DISPLAY menu is displayed as pictured below.
Navigate through the menu items using the mouse or the control button on the remote control and change
the value of the menu item. To return to the previous setup menu screen, press the ESC button.
Item
OSD
OSD CONTRAST
SEQUENCE
SEQ-DWELL TIME
CHANNEL
NAME
Figure 4.2.1. Display Mode Setup Screen
Table 4.2.1. Menu Items in DISPLAY Mode Setup
Enable/disable on-screen-display.
-
Select ON: Show it on the screen,
-
Select OFF: Disappear on the screen.
Set the visibility level of the On Screen Display (OSD).(0-100)
Enable/disable sequential display of video in
Set the dwell time of each, single channel display in sequential display mode
(3~60seconds)
Select a channel for applying the following settings using the control button to
change the channel.
Set the channel name.
Description
Single, Quad, and 10 splits mode.
23
Advertisement
Table of Contents
