Name, Function And Connection; Front Panel - Speco DVR82HD User Manual

3. Name, Function and Connection

3-1. Front Panel

The following information will help you to operate the front panel controls.
Name
CH1~10 Indicating that the channel is being recorded.
HDD Indicating that the system is accessing the hard disk.
Indicating that the system is recording video data.
RECORD
ALARM Indicating that when sensor(s) is/are triggered or motion is detected.
NETWORK Indicating that when Network client connects through the network.
BACKUP Indicating that USB or DVD-RW storage device is stored images or video.
Name
POWER
NUMBER
REW
F/REW
FF
F/ADV
REC
PLAY/PAUSE
DISPLAY
SEQ
AUDIO
PTZ
SETUP
ALARM
BACKUP
Figure 3.1.1. Front Panel
Table 3.1.1. Indication Lamps
Table 3.1.2. Front Panel Buttons
POWER ON/ OFF
Channel keys. For channel 10, press the 0 key. For channel 11, press the +10 and 1
key. For channel 16, press the +10 and 6 key.
Press to rewind the footage in playback mode.
Jump/Step backward. In playback mode, the position moves 60 seconds backward.
Press to fast forward the footage in playback mode.
Jump/Step forward. In playback mode, the position moves 60 seconds forward.
Press to start or stop manual recording.
Press to play/pause the footage in playback mode.
Press to toggle the screen mode. (
Enable/disable the automatic sequence of display in Single, Quad, and 10 splits mode.
Press to set the audio output mode. (Mute, Single Chanel, or Mix)
Press to control Pan/Tilt/Zoom operations.
Press to enter SETUP menu.
Press to set the alarm output mode. (On or Off)
Press to capture video in jpeg format in live or playback mode.
Description
Description
Single, Quad, and 10 splits mode)
19