Table of Contents
Advertisement
RC: ALL
5-1-2. Quick Operation Window
Click the right button of the mouse. Then quick operation window will be displayed.
Event indicator. When there is an event (motion recording, video loss, HDD
fail, S.M.A.R.T), this icon will be highlighted bright.
Indicates that a network client is connected to the DVR.
Indicates that sequencing mode is enabled.
Displays the current date and time.
Remote control ID display. If a remote ID is not set, the message "ALL" is
displayed.
Displays the amount of recording on the hard disk from 0-99%.
Indicates that HDD is recycled.
Continuous recording in progress.
Manual recording in progress. To set the Manual recording mode, press the
Record button on the front panel.
Motion alarm recording in progress.
Sensor recording in progress.
Figure 5.2.1. Quick Operation Window
47
Advertisement
Table of Contents
