Table of Contents
Advertisement
4-3. Setup – RECORD
In the SETUP menu, select the RECORD tab. Then, the RECORD menu is displayed as pictured below.
Navigate through the menu items using the mouse or the control button on the remote control and change
the value of the menu item.
Menu Item
CHANNEL
Select a channel for applying the following settings using the mouse or the control
button on the remote control.
Set the resolution for the specified channel.
RESOLUTION
FRAME RATE
Set the frame rate for the specified channel. The sum of the frame rate values from
each channel cannot exceed the maximum frame rates for a specific recording
resolution.
Typical values of the maximum frame rate for video are
Figure 4.3.1. Recording Mode Setup Screen
Table 4.3.1. Menu Items in Recording Mode Setup
Analog Channel (1 - 8 Ch.): D1, Half D1 and CIF
HDcctv Channel (9 - 10 Ch.): 1920x1080, 1920x540, 1280x720, 640x360
Analog 1 - 8 CH: D1@240/200 fps
HDcctv 9 - 10 CH: 1080p@30/25fps or 720p@60/50fps
Description
25
Advertisement
Table of Contents
