Table of Contents
Advertisement
4-4-3. Spot Out
Item
SPOT OUT
SPOT TYPE
SPOT ON EVENT
SPOT EVENT
DWELL TIME
SEQUENCE
SEQ-DWEL TIME
SPOT CHANNEL
Figure 4.4.4. SPOT-OUT Setup Screen
Table 4.4.4. Menu Item in SPOT-OUT Setup Screen
Spot Out 1: from 1 channel to 4 channel
Spot Out 2: from 5 channel to 8 channel
Spot Out 3: for 9 channel
Spot Out 4: for 10 channel
Select Full screen or Quad screen mode.
Enable/Disable display of the channel when an event is active.
Set the dwell time for the display of the event activated channel.
(3-10sec)
Enable/disable sequential display of spot channel in full screen.
If select ON, spot channel selection screen is displayed.
Set the dwell time for the spot channel display.(3-10sec)
Select a channel for spot monitoring using the mouse or the control
button on the remote control and press OK button.
Description
31
Advertisement
Table of Contents
