Closing The Server Case - Gateway E-9722R User Manual

Closing the server case

To close the server case:
1
2
3
4
www.gateway.com
Make sure that all of the internal cables are arranged inside the case so they will not be
pinched when you close the case.
Place the front top cover on the server, then slide it forward until it clicks into place.
Important
The hard drive carriers shown in these illustrations may look different than
the actual hard drive carriers in your server.
Place the back top cover on the server, then slide it forward (1) until it clicks into place.
Replace the screw (2) to hold the top cover in place.
Reconnect the power cords and all other cables.
27