Netopia 2200 series Software User's Manual page 291

CONFIG Commands
set wireless mode { both-b-and-g | b-only | g-only }
Beginning with Netopia Firmware Version 7.5.1. specifies the wireless operating mode for
connecting wireless clients: both-b-and-g, b-only, or g-only, and locks the Gateway in
that mode.
☛
NOTE:
If you choose to limit the operating mode to B or G only, clients using the
mode you excluded will not be able to connect.
set wireless multi-ssid option { on | off }
Beginning with Netopia Firmware Version 7.5.1. enables or disables the multi-ssid feature
which allows you to add additional network identifiers (SSIDs or Network Names) for your
wireless network. When enabled, you can specify up to three additional SSIDs with sepa-
rate privacy settings for each. See below.
set wireless multi-ssid {second-ssid | third-ssid | fourth-ssid } name
Specifies a descriptive name for each SSID. when multi-ssid option is set to on.
291