Configuring For Bridge Mode - Netopia 2200 series Software User's Manual

Configure
Configuring for Bridge Mode
Browse into the Netopia Gateway's web interface.
1.
Configure
Click on the
2.
Click on the LAN
3.
The LAN page appears.
In the box titled LAN IP Inter-
4.
face (Ethernet 100BT):
Make note of the Ethernet IP Address and
subnet mask.
You can use this address to access the
router in the future.
Advanced
Click on the
5.
hand links toolbar.
Under the heading of Services, click
6.
on the Ethernet Bridge
button in the upper Menu bar.
link.
link in the left-
link.
103