Adding Filters To A Filter Set; Example Filter Set - Netopia 2200 series Software User's Manual

Working with IP Filters and Filter Sets
Enter new name for the filter set, for example Filter Set 1.
To save the filter set, click the
filters), but you can return to it later to add filters (see
☛
NOTE:
As you begin to build a filter set, and as you add filters, after your first entry,
the Alert icon
remain until all of your changes are entered and validated. You need not imme-
diately restart the Gateway until your filter set is complete. See
Filter Set with an Interface" on page
Adding filters to a filter set
There are two kinds of filters you can add to a filter set: input and output. Input filters
check packets received from the Internet, destined for your network. Output filters check
packets transmitted from your network to the Internet.
Submit
button. The saved filter set is empty (contains no
will appear in the upper right corner of the web page. It will
171.
"Adding filters to a filter
"Associating a
set").
165