Netopia 2200 series Software User's Manual page 272

For 2200 and 3300 series gateways
Table of Contents

Advertisement

set security ipsec tunnels name "123" IKE-mode
pre-shared-key ("") {hex string}
See
page 130
Example: 0x1234
set security ipsec tunnels name "123" IKE-mode
neg-method {main | aggressive}
See
page 130
Note: Aggressive Mode is a little faster, but it does not provide identity protection for nego-
tiations nodes.
set security ipsec tunnels name "123" IKE-mode
DH-group (1) { 1 | 2 | 5}
See
page 130
set security ipsec tunnels name "123" IKE-mode
isakmp-SA-encrypt (DES) { DES | 3DES }
See
page 130
set security ipsec tunnels name "123" IKE-mode
ipsec-mtu mtu_value
This command is supported beginning with Version 7.4
The Maximum Transmission Unit is a link layer restriction on the maximum number of
bytes of data in a single transmission. The maximum allowable value (also the default) is
1500, and the minimum is 100.
set security ipsec tunnels name "123" IKE-mode isakmp-SA-hash
(MD5) {MD5 | SHA1}
See
page 130
272
for details about SafeHarbour IPsec tunnel capability.
for details about SafeHarbour IPsec tunnel capability.
for details about SafeHarbour IPsec tunnel capability.
for details about SafeHarbour IPsec tunnel capability.
for details about SafeHarbour IPsec tunnel capability.

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for Netopia 2200 series

This manual is also suitable for:

3300 series33423356Firmware version 7.6

Table of Contents