Pinhole Configuration Procedure - Netopia 2200 series Software User's Manual

Configure
Pinhole Configuration Procedure.
Configure
From the
1.
Servers link.
Since Port Forwarding is required for this example, the Netopia embedded Web server
is configured first.
☛
NOTE:
The two text boxes, Web (HTTP) Server Port and Telnet Server Port, on this
page refer to the port numbers of the Netopia Gateway's embedded admin-
istration ports.
To pass Web traffic through to your LAN station(s), select a Web (HTTP) Port number that is
greater than 1024. In this example, you choose 8100.
8100
Type in the Web (HTTP) Server Port text box.
2.
Click the Submit
3.
Click Advanced
4.
toolbar button ->
button.
. Select the Pinholes
Use the following steps:
Advanced
link, select the
link to go to the Pinhole page.
Internal
79