Wireless Mac Authorization - Netopia 2200 series Software User's Manual

For 2200 and 3300 series gateways
Table of Contents

Advertisement

Configure
Privacy modes available from the pull-down menu for the multiple SSIDs are: WPA-PSK,
WPA-802.1x, or Off-No Privacy. WEP can also be selected on the additional SSIDs as
long as it is not used on the primary SSID. WEP can only be used on one SSID, so any oth-
ers will not have WEP available.
These additional Wireless IDs are "Closed System Mode" Wireless IDs that will not be
shown by a client scan, and therefore must be manually configured at the client. In addi-
tion, wireless bridging between clients is disabled for all members of these additional net-
work IDs.
Submit
Click the
button.
After your first entry, the Alert icon
will appear in the upper right corner of your screen.
When you are finished adding SSIDs, click the Alert icon, and Save your changes and
restart the Gateway.

Wireless MAC Authorization

Wireless MAC Authorization allows you to specify which client PCs are allowed to join
the wireless LAN by specific hardware address. Once it is enabled, only entered MAC
addresses that have been set to Allow will be accepted onto the wireless LAN. All unlisted
addresses will be blocked, in addition to the listed addresses with Allow disabled.
63

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

3300 series33423356Firmware version 7.6

Table of Contents