Netopia 2200 series Software User's Manual page 134

Be sure that you have SafeHarbour VPN enabled.
3.
SafeHarbour is a keyed feature.
cerning installing Netopia Software Feature Keys.
Check the
4.
Checking this box will automatically display the SafeHarbour IPSec Tunnel Entry
parameters.
Enter the initial group of tunnel parameters. Refer to your Setup Worksheet and the
"Parameter Descriptions" on page 136 as required.
Enter the tunnel
5.
This is the only parameter that does not have to match the peer/remote VPN device.
Enter the
6.
Select the
7.
Select the
8.
Add
Click
9.
The Tunnel Details page appears.
134
See "Install Keys" on page 184.
Enable SafeHarbour IPSec
Name .
Peer External IP Address
Encryption Protocol
Authentication Protocol
.
checkbox.
.
from the pull-down menu.
from the pull-down menu.
for information con-