Viewing Filters - Netopia 2200 series Software User's Manual

Working with IP Filters and Filter Sets
If Protocol Type is set to TCP or UDP, the settings for port comparison will appear.
These settings only take effect if the Protocol Type is TCP or UDP.
From the Source Port Compare
9.
method for the filter to use on a packet's source port number.
Source Port
Then select
the table on page 158).
From the Destination Port Compare pull-down menu, choose a compari-
10.
son method for the filter to use on a packet's destination port number.
Destination Port
Then select
on (see the table on
When you are finished configuring the filter, click the
11.
save the filter in the filter set.
Viewing filters
To display the table of input or output filters, select the Filter Set Name in the Filter Set
Add
page and click the
The table of filters in the filtersets appears.
pull-down menu, choose a comparison
and enter the actual source port number to match on (see
and enter the actual destination port number to match
page 158).
Edit
or button.
Submit button to
169