Configure
• Quality of Service (QoS) – This is the Quality of Service setting for the flow, based
on the TOS bit information. Select Expedite, Assure, or Off (default) from the pull-down
menu. The following table outlines the TOS bit settings and behavior:
QoS Setting
TOS Bit Value
Off
TOS=000
Assure
TOS=001
Expedite
TOS=101
Behavior
This custom flow is disabled. You can activate
it by selecting one of the two settings below.
This setting allows you to pre-define flows with-
out actually activating them.
Use normal queuing and throughput rules, but
do not drop packets if possible. Appropriate
for applications with no guaranteed delivery
mechanism.
Use minimum delay. Appropriate for VoIP and
video applications.
91