Enterasys VH-2402S Management Manual page 44

Vertical horizon fast ethernet switch
Hide thumbs Also See for VH-2402S:
Table of Contents

Advertisement

Displaying the Current STA for Ports or Modules
The parameters shown in the following figure and table are for port or
module STA Information (Port 1-12, Port 13-24, Port 25-32).
Port
-------------------------------------------------------------------------------------------------------
1.
10/100TX
2.
10/100TX
3.
10/100TX
4.
10/100TX
5.
10/100TX
6.
10/100TX
7.
10/100TX
8.
10/100TX
9.
10/100TX
10.
10/100TX
11.
10/100TX
12.
10/100TX
<OK> <PREV UNIT> <NEXT UNIT> <PREV PAGE> <NEXT PAGE>
Figure 2-27. Spanning Tree Port Information
Parameter
Type
Status
36 VH-2402S User Interface
Vertical Horizon Local Management -- VH-2402S
Spanning Tree Port Information : Unit 1 Port 1-12
Type
Status
FORWARDING
FORWARDING 19
FORWARDING 19
FORWARDING 19
LISTENING
LEARNING
FORWARDING 19
FORWARDING 19
FORWARDING 19
FORWARDING 19
FORWARDING 19
FORWARDING 19
Use <TAB> or arrows keys to move. <Enter> to select.
Description
Shows port type as:
10/100TX : 10Base-T / 100Base-TX
100FX
: 100Base-FX
1000SX
: 1000Base-SX
1000LX
: 100Base-LX
Displays the current state of this port within the spanning tree:
No Link
Disabled
Blocking
Listening
Learning
Forwarding The port forwards packets, and continues learning
Designated
Designated
Cost
0
0.0000E800E800
32768.00E029522800 128.1
32768.00E029522800 128.1
32768.00E029522800 128.5
19
32768.00E029522800 128.6
19
32768.00E029522800 128.3
32768.00E029522800 128.3
32768.00E029522800 128.3
32768.00E029522800 128.4
32768.00E029522800 128.5
32768.00E029522800 128.5
32768.00E029522800 128.5
There is no valid link on the port.
Port has been disabled by the user or has failed
diagnostics.
Port receives STA configuration messages, but does
not forward packets.
Port will leave blocking state due to topology change,
starts transmitting configuration messages, but does
not yet forward packets.
Has transmitted configuration messages for an
interval set by the Forward Delay parameter without
receiving contradictory information. Port address
table is cleared, and the port begins learning
addresses.
addresses.
Designated
Bridge
Port
128.3
VH-2402S

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents