Enterasys VH-2402S Management Manual page 36

Selection
802.1Q VLAN
Base Information
802.1Q VLAN
Current Table
Information
802.1Q VLAN Static
Table Configuration
Port Assignment
VLAN Configuration
Multicast Router Port
Information
Static Multicast
Router Port Cfg
IGMP Member Port
Configuration
Port Security
Configuration
* Not implemented in the current firmware release.
28 VH-2402S User Interface
Description
Displays basic VLAN information, such as VLAN version number
and maximum VLANs supported.
Displays VLAN groups and port members.
Configures VLAN groups via static assignments, including setting
port members, or restricting ports from being dynamically added
to a port by the GVRP protocol.
Displays/configures port-specific VLAN settings, including PVID,
ingress filtering, and 802.1Q trunks.
Displays the ports on the switch attached to a neighboring
multicast router/switch for each VLAN ID.
Assigns ports that are attached to a neighboring multicast router/
switch.
Assigns ports that are attached to hosts who want to receive a
specific multicast service.
Allows you to enable and configure port security for the switch.
VH-2402S