Configuring Ip Trap Managers - Enterasys VH-2402S Management Manual

Configuring IP Trap Managers

The following figure and table describe how to specify management
stations that will receive authentication failure messages or other trap
messages from the switch. Up to 5 trap managers may be entered.
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter
IP Address
Community Name
Status
22 VH-2402S User Interface
Vertical Horizon Local Management -- VH-2402S
SNMP Configuration : IP Trap Managers
IP Address
1. 10.1.0.23
2.
3.
4.
5.
<APPLY> <OK>
Figure 2-14. IP Trap Managers
Description
IP address of the trap manager.
A community specified for trap management access.
Sets administrative status of selected entry to enabled or
disabled.
Community Name
public DISABLED
<CANCEL>
Status
VH-2402S