Configuring Management Access - Enterasys VH-2402S Management Manual

Configuring Management Access

Use the Management Configuration menu to define which VLAN has
management access to the switch. Parameters shown on this screen are
indicated in the following figure and table.
Use <TAB> or arrow keys to move, <Space> to scroll options.
Parameter
Management VLAN
VLAN
26 VH-2402S User Interface
Vertical Horizon Local Management -- VH-2402S
Management Configuration
Management VLAN
VLAN
<APPLY>
Figure 2-18. Management Configuration
Default Description
All Select ALL to give all VLANs access to switch
management, or ONE to restrict access to a
specified VLAN. If you select just one VLAN, you
must specify its VLAN ID on the following line.
1 Specifies the VLAN ID that has access to switch
management.
: ALL
: 1
<OK> <CANCEL>
VH-2402S