Enterasys VH-2402S Management Manual page 18

Selection
Device Control Menu
Port Configuration
Port Information
Spanning Tree
Configuration
Spanning Tree
Information
Mirror Port
Configuration
Port Trunking
Configuration
IGMP Configuration
BStorm Control
Configuration
Extented Bridge
Configuration
802.1P Configuration
802.1Q VLAN
Base Information
802.1Q VLAN Current
Table Information
802.1Q VLAN Static
Table Configuration
Port Assignment
VLAN Configuration
Multicast Router Port
Information
Static Multicast Router
Port Cfg
IGMP Member Port
Configuration
Port Security
Configuration
Network Monitor Menu
Port Statistics
RMON Statistics
Unicast Address Table
10 VH-2402S User Interface
Description
Enables any port, enables/disables flow control, and sets
communication mode to auto-negotiation, full duplex or half
duplex.
Displays operational status, including link state, flow control
method, and duplex mode.
Enables Spanning Tree Algorithm; also sets parameters for
hello time, maximum message age, switch priority, and
forward delay; as well as port priority and path cost.
Displays full listing of parameters for the Spanning Tree
Algorithm.
Sets the source and target ports for mirroring.
Specifies ports to group into aggregate trunks.
Configures IGMP multicast filtering.
Allows you to enable broadcast storm control and set the
packet-per-second threshold.
Displays/configures extended bridge capabilities provided by
this switch, including support for traffic classes, GMRP
multicast filtering, and VLAN extensions.
Configures default port priorities and queue assignments.
Displays basic VLAN information, such as VLAN version
number and maximum VLANs supported.
Displays VLAN groups and port members.
Configures VLAN groups via static assignments, including
setting port members, or restricting ports from being
dynamically added to a port by the GVRP protocol.
Displays/configures port-specific VLAN settings, including
PVID, ingress filtering, and 802.1Q trunks.
Displays the ports on the switch attached to a neighboring
multicast router/switch for each VLAN ID.
Assigns ports that are attached to a neighboring multicast
router/switch.
Assigns ports that are attached to hosts who want to receive
a specific multicast service.
Allows you to enable and configure port security for the
switch.
Displays statistics on network traffic passing through the
selected port.
Displays detailed statistical information for the selected port
such as packet type and frame size counters.
Provides full address listing, as well as search and clear
functions.
VH-2402S