Port Security Configuration - Enterasys VH-2402S Management Manual

Port Security Configuration

Use the Port Security Configuration screen to enable and configure port
security for the switch. Port Security allows you to configure each port with
a list of MAC addresses of devices that are authorized to access the
network through that port.
Secure address count : 0
Unit : 1
[Show]
Mode:DISABLE [Apply]
Parameter
MAC Address
Secure Address Count The number of authorized MAC addresses for the specified
Unit
Port
[Show]
[More]
Mode
[Apply]
MAC
[Add]
[Delete]
[Clear]
9033645-01
Vertical Horizon Local Management -- VH-2402S
Port Security Configuration
MAC Address
--------------------------------------------------------------
Port : 1
[More]
Use <TAB> or arrow keys to move. <Enter> to select
Figure 2-44. Port Security Configuration
Description
A list of the authorized MAC addresses that can access the
network through the specified port.
port.
The stack unit ID.
The port number on the unit.
Displays authorized MAC addresses for the specified port.
Displays more MAC addresses for the port.
Port security can set to three states; Static, Disable, or
Learning. When set to Static, the switch will drop packets from
the port if the source MAC address does not match one of the
addresses in the MAC Address list. If set to Learning, the
switch will add the source MAC address of all packets received
on the port to the authorized MAC Address list.
Applies a change of Mode to the port.
A specific MAC address to be added or deleted from the list.
Adds a new MAC address to the current list.
Removes a MAC address from the current list.
Clears all the MAC addresses for the current port.
MAC Address
MAC : 00-00-00-00-00-00
[Add] [Delete]
[Clear]
<OK>
VH-2402S User Interface 57