Installing The Ps Ppd Driver - Konica Minolta bizhub PRESS 1052 User Manual

6.1 Printer Driver for Mac OS
8
Click [Close].
This completes the printer driver installation.
Then select printer and connect to it. (Refer to page 6-4.)
6.1.2

Installing the PS PPD driver

0 When the PS Plug-in driver has been installed, you must delete it before you install. For details on de-
leting the printer driver, refer to page 8-5.
1
Start the Macintosh computer.
2
Insert the Driver CD-ROM into the CD-ROM drive.
% Exit all running applications, if any.
3
Open the folder in the CD-ROM that contains the desired printer driver.
% Select a folder according to the printer driver, operating system, and language to be used.
4
Select the printer driver to use according to OS and copy it on the desktop
Three digit number at the end of the package file name for the printer driver represents compatible OS.
For example, [106] means that it is compatible with OS X 10.6.
% KONICAMINOLTA_1250_xxx.pkg
5
Double-click the file copied onto the desktop.
The installer starts.
% To cancel installation, press [Cancel].
6
Click [Continue] following the instructions on the pages that follow until the [Installation] page appears.
% When the name and password prompt appears during the procedure, enter the administrator name
and password.
7
In the [Installation] page, click [Install].
The printer driver is installed in the computer. When the installation is completed, a message appears.
% For OS X 10.4, when the printer driver is installed for the second and subsequent times, [Install] may
change to [Upgrade].
8
Click [Close].
This completes the printer driver installation.
Next, select a printer. (Refer to page 6-4.)
bizhub PRESS 1250/1250P/1052
6
6-3