Konica Minolta bizhub PRESS 1052 User Manual page 78

9.1 Print operations
Basic printing method (Mac OS X)
1
Open the data in the application, and click [File]. Then click [Print] from the menu.
% If the menu is not available, click [Print].
The [Print] window appears.
2
Check that the desired printer name is selected in [Printer:].
% If the target printer is not selected, select it.
% If the printer does not appear, select the printer from [Print & Fax] or [Printer Setup Utility]. For de-
tails, refer to page 6-4.
% The [Print] window varies depending on the application software.
% You can also change the printer name. The following window shows an example where the printer
name is changed to "Printer Name".
3
Specify the print range and the number of copies to print.
% When the setting items are not displayed in OS X 10.5/10.6, click
4
Switch the setting window as necessary to change the printer driver settings.
% For PS Plug-in driver, when you select [bizhub PRESS 1250/1052PS] from the pane pop-up menu
and click the [Set], Printing Preferences screen appears. You can specify several settings on this
screen. For details, refer to page 11-3.
% For PPD driver, when you change the pane pop-up menu, other setting screen for printer driver ap-
pears. You can specify several settings on this screen. For details, refer to page 13-2.
5
Click [Print].
The printing is started.
Reference
- You can check a job that was scanned using this machine in the [Job List] screen. For details, refer to
page 16-14.
bizhub PRESS 1250/1250P/1052
9
on the right side of [Printer:].
Setting items
Print options
9-3