Cover Mode] Tab - Konica Minolta bizhub PRESS 1052 User Manual

10.3 Parameter details
10.3.5

[Cover Mode] tab

Function Name
[Front Cover]
[Front Cover Tray]
[Paper Type (Pa-
per Name)]
[Back Cover]
[Back Cover Tray]
[Paper Type (Pa-
per Name)]
[Per Page Setting]
[Edit List]
[Front Cover from
Post Inserter]
[Number of
Sheets]
[Back Cover from
Post Inserter]
[Number of
Sheets]
Reference
- The [Front Cover from Post Inserter]/[Back Cover from Post Inserter] function is available only when an
optional [Cover Sheet Feeder] is installed.
bizhub PRESS 1250/1250P/1052
Option
[Blank], [Print]
Tray 1 - 8
-
[Blank], [Print]
Tray 1 - 8
-
Off, On
[List Name]
PI Tray 1 - 2
PI PFU Tray 1-3
1 - 40
PI Tray 1 - 2
PI PFU Tray 1-3
1 - 40
Description
Set this to print adding a front cover.
Specify a paper tray for a front cover.
Selectable items vary depending on the option installa-
tion status.
You can specify the paper name that is registered in
this machine.
Set this to print adding a back cover.
Specify a paper tray for a back cover.
Selectable items vary depending on the option installa-
tion status.
You can specify the paper name that is registered in
this machine.
You can insert the different paper between pages or
switch the paper or tray per page. You can make a list
to specify the condition per page using the [Edit List].
Select the list name to edit. The settings are displayed
in the list. For details, refer to page 10-25.
Set this to print adding the front cover from the post in-
serter.
Specify the number of the front cover sheets from the
post inserter to insert.
Set this to print adding the back cover from the post in-
serter.
Specify the number of the back cover sheets from the
post inserter to insert.
10
10-24