Konica Minolta bizhub PRESS 1052 User Manual page 210

15.1 Controller Machine Setting
Item
[Simplex/Duplex]
[Binding Position]
[Staple]
[Dual Staple Pitch]
[Punch]
[Fold/Trimming]
[Offset]
[Output Application]
[Order]
[Sets]
[Sort/Group]
[Paper Size]
[Orientation]
[Banner Option]
[Banner Tray]
[Convert Paper Size]
[Combine Originals]
[Booklet Pagination]
[Adhesive binding]
[Image Pos.]
[Quality]
[Full bleed]
[Ring Binding]
[180° Rotate]
bizhub PRESS 1250/1250P/1052
Description
Specify the default simplex/duplex print setting.
Specify the default [Binding Position].
Configure the staple setting when the data to be printed has no sta-
ple setting information.
Configure the pitch between two staples.
Configure the punch setting when the data to be printed has no
punch setting information.
You can set [Fold/Trimming] if there is no [Fold] or [Trimming] setting
in print data.
Specify the default [Offset]setting.
Specify the default [Output Application] setting.
Specify the default [Order] setting.
Specify the default [Sets] setting.
Specify the default [Sort/Group] setting.
Specify the default [Paper Size] setting.
Specify the default [Orientation] setting.
Specify whether to print the banner page (cover page) showing the
sender or title of the print job.
Specify the paper tray used to print banner pages.
Specify the converting paper size when the paper size that is spec-
ified by the Direct Print Setting is unavailable in the tray.
Specify the default [Combine Originals] setting.
Specify the default [Booklet Pagination] setting.
Specify the default [Adhesive binding] setting.
Specify the default [Image Pos.] setting.
Specify the default [Quality] setting.
Specify the default [Full bleed] setting.
Specify the default [Ring Binding] setting.
Specify the default [180 Rotate] setting.
15
15-6