Printer Driver For Mac Os; Installing The Ps Plug-In Driver - Konica Minolta bizhub PRESS 1052 User Manual

6.1

Printer Driver for Mac OS

6 Installation on Macintosh Computers
This chapter describes the settings necessary when using Macintosh and the procedure for installing printer
drivers for Macintosh.
6.1 Printer Driver for Mac OS
The following 2 printer drivers support Mac OS.
- PS Plug-in Driver
- PS PPD driver
6.1.1

Installing the PS Plug-in driver

0 When the PS Plug-in driver has been installed, you must delete it before you install. For details on de-
leting the printer driver, refer to page 8-5.
1
Start the Macintosh computer.
2
Insert the Driver CD-ROM into the CD-ROM drive.
% Exit all running applications, if any.
3
Open the folder in the CD-ROM that contains the desired printer driver.
% Select a folder according to the printer driver, operating system, and language to be used.
4
Copy [bizhub PRESS 1250 1052PS.pkg] on the desktop.
5
Double-click the file copied onto the desktop.
The installer starts.
% To cancel installation, press [Cancel].
6
Click [Continue] following the instructions on the pages that follow until the [Installation] page appears.
% When the name and password prompt appears during the procedure, enter the administrator name
and password.
7
In the [Installation] page, click [Install].
The printer driver is installed in the computer. When the installation is completed, a message appears.
% For OS X 10.4, when the printer driver is installed for the second and subsequent times, [Install] may
change to [Upgrade].
% In [Install] screen, we do not use [Change] at this time although it becomes available when you use
multiple internal hard disks.
bizhub PRESS 1250/1250P/1052
6
6-2