Setting Up Ldap - Konica Minolta bizhub C650 User Manual

Network Settings

Setting Up LDAP

Register LDAP servers and specify authentication settings. Settings can be specified for the following.
Setup LDAP screen 1/6
Parameter
LDAP Server Name
Max. Search Results
Timeout
Initial Setting for Search De-
tails
Setup LDAP screen 2/6
Parameter
Server Address
Search Base
Setup LDAP screen 3/6
Parameter
SSL Setting
Port Number
Port Number (SSL)
Setup LDAP screen 4/6
Parameter
Authentication Type
C650
Description
Type in the name of the LDAP server to be registered.
Use the keyboard that appeared in the touch panel to type in the server name (32 char-
acters or less).
Specify the maximum number of destinations to be displayed after a search. To
change the setting, press the [C] (clear) key, and then use the keypad to type in the
desired setting. (Range: 5 to 1000)
Specify the maximum wait time for a search operation. To change the setting, press
the [C] (clear) key, and then use the keypad to type in the desired setting. (Range: 5 to
300 seconds)
Specify the initial search conditions for "Name", "E-Mail", "Fax Number", "Last Name",
"First Name", "City", "Company Name" and "Department" in an advanced search.
Description
Specify the address of the LDAP server. Use the keyboard that appears in the touch
panel to type in the address (255 characters or less).
Specify the search starting point in a hierarchical structure arranged on the LDAP serv-
er. Searches are performed by also including the sub-directories lower than the start-
ing point that was specified.
Use the keyboard that appears in the touch panel to type in the address (up to 255
characters).
Description
Select whether or not SSL (data encryption) is used when connecting to an LDAP serv-
er.
When SSL is used, communication information is encrypted.
Specify the port number for the LDAP server. To change the setting, press the [C]
(clear) key, and then use the keypad to type in the desired port number. (Range: 1 to
65535)
Specify the port number when SSL is used. To change the setting, press the [C] (clear)
key, and then use the keypad to type in the desired port number. (Range: 1 to 65535)
Description
Select the authentication method used for logging on to the LDAP server.
Anonymous: This authentication method does not require a user name and password.
If "Anonymous" is selected, dynamic authentication is disabled.
Simple: This simple authentication method requires a user name and password. Be
careful since the passwords can be leaked over the network.
Digest-MD5: This authentication method can be used on a typical LDAP server. If au-
thentication fails using Digest- MD5, the authentication is performed by automatically
switching to CRAM-MD5.
GSS-SPNEGO: This authentication method can be used with Active Directory in Win-
dows (Kerberos authentication).
NTLM v1 and NTLM v2: These standard user authentication methods can be used with
Windows NT.
They can be used for logging on when sharing files and printers.
4
4-48